Roof-Mounted Wheelchair Loader
A simple and reliable solution for independent storage of wheelchairs.

| Gallery |
Australian Practicality
The WYMO roof mounted wheelchair loader is an answer to the problem of wheelchair storage. It is an Australian made product, exported to four continents, with an excellent reputation for reliability, durability and value established over more than twenty years.
Using a simple and innovative design, the loader is operated from the inside of the vehicle to raise a manual folding wheelchair and secure it to the roof of the car. After transferring to the vehicle and folding their wheelchair, the user flicks a switch and the lifting strap is lowered. The folded manual wheelchair is then hooked on to the strap by the front castor struts and winched up onto car roof. An elastic strap is fitted to the outside wheel and tightens as the gate ascends. After the retaining strap is hooked on, the wheelchair is held with complete security. The roof-mounted loader provides dependable assistance that you can trust will never leave you stranded.
The roof mounted wheelchair loader is a simple and reliable solution that allows wheelchair users and those who care for them to easily load and unload their wheelchair independently.
Features
Spring based lifting mechanism that outlasts and out performs
Winch driven by powerful motor
Satin black quality powder-coated finish
Small size
1 Year Warranty
Can be installed to either the driver or passenger side of the vehicle
Warranty 12 months parts and labour
A nylon wheelchair cover is also available.
The hoist is clamped onto the vehicle's roof gutters or a standard roof rack.
Easily and inexpensively transferred to another vehicle
Operating time for both loading and unloading of wheelchair less than 2 minutes
The roof mounted loader weighs approximately 16kg and has a load capacity of 50kg. This wheelchair hoist adds a height of 250mm (unloaded) to the car and operation of the wheelchair hoist requires one metre clearance above the car roof and a distance of 1.5m is required between the car and an adjacent wall / obstacle. The WYMO roof mounted wheelchair loader is only available for use with folding wheelchairs
IN THIS SECTION
PME FEATURES
Can-Am Spyder Kit
Paravan Wheelchair
- Can-Am Spyder Kit
- Paravan Wheelchair
- Short Stature Solutions
- PME Hand Controls
- PME Spinmaster
- Easyspin
Exceeded Expectations
I have had two performance cars modified by PME (VW Golf R32 and recently a Mitsubishi Lancer Evolution X). Both jobs were perform... Read More
Short Stature Solutions
Thank you very much Bill and everyone else at PME who worked on my Honda Jazz.
I found your web site an invaluable source of information and... Read More
Not a problem
I recently purchased a Chrysler Grand Voyager which was modified by the staff at PME to suit my needs as a C-5 quadriplegic. It involved the guys a... Read More
Help and Support
I would like to thank Bill at PME and all their employees for all their help and support in the modification of my vehicle. PME were very efficien... Read More
BMW quality
I was originally referred to Problem Management Engineering (PME) by a couple of Melbourne businesses, which specialise in converting vehicles for ... Read More


