With an increased focus on safety the E-Tronic is host to an array of new features only possible through our advanced electronic interface.

Have confidence in knowing that your precious cargo is in good hands

• Smart Brake Throttle Over-Ride System with hill start functionality

• Knee-Airbag Compatible, no compromising the vehicles existing safety features
  

• Driver facing surfaces are soft and contoured Rubberised Poly Urethane protecting you entering/exiting the car
  

• Redundant Contactless Sensing for Accelerator interface
  

• Designed to exceed the Australian standard for Adapted Driving Controls
  

A critical safety system with unique added functionality for the adventurous spirit in each and every driver. Because we know that our clients use their cars for much more than just A to B transport. -

Accelerator input is canceled during emergency braking

• Acting to cut inadvertent acceleration in an emergency situation

With brakes applied before accelerator input, engine speed can be increased to desired rpm before releasing the brakes

•  A handy feature for offroad use, at the boat ramp or even drag strip.

Whether you’re a city slicker or the bloke from the bush the city/sport mode switch might be a handy addition to your E-Tronic hand control.

Flicking the switch reduces the sensitivity of the accelerator input by 50%.

Handy around town for those tight and awkward parking spots or when crawling in heavy traffic.

Also useful out bush, activate the switch on loose or slippery surfaces such as sand, snow or gravel to reduce the likely chance of wheel slip occurring during take off.

The E-Tronic Hand Control is the only electronic hand control on the market which has been designed specifically to meet and exceed the requirements of the Australian Standard for Adapted Driving Controls  - AS:3954

This includes -

• Fatigue testing to 250 000 cycles
  
• Strength testing in braking & acceleration operation
  
• Vibration testing on multiple axis
  
• EMC immunity and interference testing

Have confidence in knowing your hand control has been designed and tested to conform to the Australian Standard and for Australian conditions.

The optional PME LIN Switch has been specially designed to accompany the E-Tronic Hand Control. This provides commonly used secondary functions at your fingertips. No need to juggle between the steering wheel, hand control and indicator/wiper stalk, with the LIN Switch ergonomically placed so that you can perform all the above functions using your thumb whilst simultaneously braking or accelerating with the same hand.
 

• Self Canceling indicators
• High Beam Flash / Toggle
• Cycle Wiper Speeds
• Activate Washer Jets
• Horn

In the interests of adaptability and customisation we offer an additional switch block within easy reach of the accelerator handle. These analogue switches can be wired into your sport shift system for more spirited driving or even to control your cruise control on those long haul trips.

Some European vehicles feature the indicator stalk on the left in this case you may opt for the standard Horn/Auxiliary switch only

We have designed an array of handles each with their own feel and merits. Particular attention was paid towards designing a handle for those with impaired hand function

Ortho Handle - As seen above, features a quick release, leather wrapped Orthopaedic attachment. Can be used by drivers with limited dexterity in their fingers and some hand function impairment.

Ergo Handle -

The Ergo Handle is designed for the driver with mild hand impairment. Cross knurlled stainless steel inserts help grip the various surfaces of the handle whilst the swept back top contour is easy to manipulate without using fine motor function.